[Date Prev][Date Next][Thread Prev][Thread Next]
  • Thread Index
  • Date Index
  • Subject Index
  • Rod actions/choices Spey Classes in N.J.



    Walter & Group............

    From Phil Gay:

    Jerry and  all,
     
        I advise all my students to start with a medium action rod.  My school rods are 8 1/2 5 wt Orvis Clearwaters.  I'm not necessarily a fan of Orvis overall but I like this particular rod action and was made a deal I couldn't refuse.
     
        Phil
     
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Comment:  I recommend a medium rod for new casters and intermediates as well. 
            Gordy
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Jim Valle on more advice with regard to choices of tackle for fishing striped bass (In answer to Molly's question):
     

    Gordy, Molly & Group,

     

    I have to admit I am trying to limit the number of rods and lines I own, so keep that in mind as you read my thoughts.

    For Salt (Stripers and Blues, Albies)  I would stick to a 9 wt rod, with wind etc.  I prefer a faster rod not necessarily an ultra fast!

    I, as someone else mentioned, always tell my students an ultra fast rod is tough to keep up with all day long.

    You can always go to a 10 wt line on a faster 9wt rod and slow it down a bit… will work fine. After a long day that 10 will get heavy too!

     

    I would then choose an intermediate line at least an intermediate tip (again a little more versatility for the $) I like having a floating portion for mending etc. with changeable sink rate tips.

    From the beach that’s fine and that is where I prefer to fish. In reasonable shallow depths from the boat this type line will cover the water column.

     

    From the boat in deep water with the big fish on the bottom you will need a depth charge line and a lot of sink time patience, this is a tough fishing. Hard to get your line down and keep it down.  

     

    Overall, I have to say the preferred line for stripers etc. is a simple clear intermediate sinking line.

     

    Hope that helps,

     

    Jim

     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Jim ..... I agree.   For very shallow water striper fishing, I often make an intermediate line perform almost like a floating line by doing a check haul just as the loop unrolls and actually starting my strip retrieve just before the fly hits the water.  As long as I keep it moving, it won't sink much at all unless a heavy fly is used.

    When stripers are deep... say 20' to 30', I MUCH prefer a density compensated full sink class VI line one designation up from that of the rod.  This keeps the fly in the strike zone a great deal longer by far than a sink tip line.  I make my cast into the wind from the skiff, then throw a few stack mends before starting a slow, "bumpy" retrieve. ......  deadly !

    Gordy

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Gordy and Group,

     

    Please extend an invitation to all in the study group:-

     

    Interesting East Coast Opportunity! Could be some Stripers or Blues around !!

     

    With the cooperation of my local fly shop Al Buhr has graciously agreed to come east and give a 2 day, two-handed/Spey clinic on May 19-20 (see the details below).

    Al’s new book is included in the cost of the clinic. This clinic is open to all casters and instructors.  (Limited to max 8 students)  (cost $300)

     

    Additionally on Monday May 21 Al will conduct a THCI Workshop for anyone preparing for their THCI. (cost $100)

    Sign up for either or both.

     

    Anyone interested or questions email me  jfv@xxxxxxxxxxxx

     

    I have included a course outline for the 2 day clinic below.  

    Should be very educational and a lot of fun!

    The more I learn about Spey the more I find interesting applications to the single handed rod.

     

    Thanks

    Jim

     

    Combined Two Handed Fly Casting

       THCI Workshop and Spey Clinic

     

    When:               May 19-20, 2007   (8:30am – 4:00 pm)

    Where:             L&H Woods and Water

    Hwy 35

    Wall, NJ 07719

    Class Size:       Maximum  8, (Minimum 3)

    Cost:                $300/student includes two day workshop, lunch and book, (lodging and transportation not included)

                            Cancellations after Apr 15 are non refundable unless a substitute is found

               

     

    Equipment:        Two Handed Rod, Reel, Line, Leader & Yarn Fly, Waders and appropriate clothing, eye protection and safety items

    (Limited (rods, reels and lines only) equipment available by pre-arrangement)

     

    Guest Instructor:

                            Al Buhr             twobuhrs@xxxxxxx      Author, FFF Certified Master, Governor and Certified Two Handed Casting Instructor

    Assisted by:     Jim Valle           jfv@xxxxxxxxxxxx        L&H Woods & Water Fly Casting Pro, FFF Certified Master

     

    Two-handed Fly Casting/Spey Workshop

    May 19-20 2007

    Spey Casting: Simple and Easy with Al Buhr

    Two-day class: $300.

     

    “An easy way to improve your fishing success is with better casting techniques.”

     

    This is a great workshop for those who wish to learn or improve their two-handed casting. The beginning casters will quickly learn from a simple step-by-step method of instruction covering the key elements and movements of each cast. Those at an intermediate level will have their casting fine tuned with hands-on instruction. The class will focus on the fundamentals of six primary casts: Overhead, Switch Cast, Single Spey, Double Spey, Snake Roll and Snap-T. The class will discuss the multiple uses of two-handed rods, from trout streams to the surf. The class includes a casting instruction book, “Two-Handed Fly Casting: Spey Casting Techniques” as a future reference guide.

     

    o        Learning to spey cast will bring a new dimension to your fishing. The smooth flowing movements of spey casting is a delightful way to present the fly.

     

    o        Spey casting is a simple and quick way to reposition your fly to a new location.

     

    o        Little or no back cast is need, so fishing in tight situations is easy.

     

    o        In windy situations, spey casting allows the line and fly to be cast from the down-wind side, keeping you safely clear of the cast.

     

    o        The leverage gained from utilizing both hands to drive the cast accommodates lines that will cast further distances and/or sink to greater depths.

     

    o        Fly fishers who find large single-handed rods too demanding will discover the casting advantage of two-handed rods much less tiring and can resume fly fishing with the two-handed rod.

     

    o        Learn to spey cast and then utilize these casts with your single-handed rod.

     

    “For every tough fishing situation there is a spey cast that will adapt and present the fly.”

     

    Al Buhr is from the Pacific Northwest, the author of the casting instruction book “Two-Handed Fly Casting: Spey Casting Techniques” and the fly line building handbook “How to Design Fly Lines”. Al is one of the featured casters in the DVD “The Art of Spey Casting”.

     

    Al has over 25 years of experience in single and two-handed spey casting. During this time, he has been at the forefront of two-handed rod and fly line development and works closely with Sage Rods and Scientific Anglers on designs.

     

    Al Buhr is a member of the FFF Casting Board of Governors and is Chairman of the FFF Two-Handed Casting Program. Al is a certified Master Casting Instructor and a certified Two-Handed Casting Instructor.

     

     

    Class out line:

    Sat. am

    8:30 - 9:00 – Meet at the fly shop. Introductions and related discussions.

                            Travel to casting local.

     

    9:00 - 9:30         Class to start, discuss grip, stance, rod mechanics and the basic stroke.

                            Flip the tip exercise – on grass, roll then overhead

                           

    9:30 - 10:45       Overhead, stroke, rod loading, stop.  Loop size, smooth loading.

                           

    10:45 - 12:00     Switch cast, lift and set the line – hop the dangle to the anchor - rod loading off

    surface tension, D-loop, front loop

     

    12:00 - 12:30 Lunch

     

    12:30 - 12:45 Questions and answers

     

    !2:45 - 1:00        Switch cast review.

     

    1:00 - 2:00         Single spey, 30-degree change, shot-gun lift, lift and set, sweep on incline,

    smooth align anchor, straight front cast.

     

    2:00 - 3:00         Double spey, shot-gun lift, sweep to position anchor, fold to D-loop at 180.

     

    4:00 -                end session.

     

     

    Sun. am

    9:00 am            Meet at casting location, question / answer.

     

    9:15- 9:45          Review overhead.

     

    9:45 - 10:15       Review switch cast.

     

    10:15 - 11:15 Snake Roll, crescent lift, draw the oval parallel

     

    11:15 – 11:30 Short break

     

    11:30 - 12:15     Snap –T, lift-snap, fold to D-loop at 180

     

    12:15 – 2:00      Review casts, address individual casting issues,

     

    2:00 -                Close